Acofar Sterile Adhesive Dressing 7.2x5 cm 10 units

1. Carefully clean the wound with water and soap or antiseptic solution.

2. Ensure the area is dry to maximize the adhesion of the dressing.

3. Carefully remove the protector from the dressing without touching the central sanitary towel.

4. Place the sanitary towel directly over the wound, making sure to cover it completely.

5. Gently press the adhesive edges to firmly fix the dressing.

Change the dressing if it becomes wet, dirty, or as directed by the doctor

- Do not use if the seal is broken or damaged to ensure sterility.

- Intended exclusively for external use on intact skin near the wound.

- Do not reuse under any circumstances to avoid infections.

- Avoid prolonged contact with water or intense moisture to preserve adhesion.

- Keep out of reach of children to prevent accidental ingestion.

-Central sanitary towel composed of non-woven fabric with 70% viscose fiber and 30% synthetic fiber, with a weight over 50 g/m².

-The absorbent layer is made up of 85% viscose fiber and 15% synthetic fiber with a weight over 250 g/m².

-Hypoallergenic, breathable, and high-adhesion adhesive.